CALCA Direct to Film TPU DTF Powder, Digital Transfer Hot Melt Adhesive Powder (44lbs , 20kg/Barrel, Medium, White), Direct Print on T-Shirts Textile
CALCA Polyurethane (TPU) hot-melt adhesive powder has excellent bonding and flexibility properties with CALCA DTF inks.
CALCA DTF Powder has a soft and stretchy feel and offers high adhesion. It will stick to the ink and not the film. The colors will turn out bright, vivid and waterproof and they are washable and durable.
Resistance to wet and dry washing performance, it is especially suitable for adhesion of high elastic cloth such as Lycra, cotton, nylon, leather, EVA and many other material.
They can be printed on cotton and polyester. Design on leather, canvas, T-shirts, pillow cases, caps, gloves, sneakers, phone cases and so much more.
DTF powder or pretreat powder is a hot melt powder made of polyurethane resin and grinded into adhesive powder. It's used to cover the prints before the process of pressing begins.
– Premium quality & superior soft hand feel.
– Great wash resistance, stretchability, not easy to fall off.
– Easy to separate from the film.
– Non-toxic and environmentally friendly.
– Works best with CALCA Inks and Direct Ink Brands.
– Work with all DTF & DTG printers on the market and both hot and cold PET films for high production output.
– 2.2lbs of powder has an application of almost about 100-150 A3 sheets.
Certified: OEKO-TEX Standard 100
Other Names: Polyurethane hot-melt adhesive powder
Melt point: 230 - 266℉ (110 - 130°C)
Washable: 140℉ (60°C) excellent, 104℉ (40℃) good
Particle diameter: 120 - 250μm
Transfer temperature: 302℉ - 320℉ (150-160°C)
Press time:8-10 seconds
Water Resistance Level: Waterproof
Stretchy: Yes (No stretch is optional)
Shelf Time: 24 months
Dry Cleaning: General
Drying Conditions: Naturally dry or hot air dry, take complete drying as standard
Barrel Size: 12.6in x 12.6in x 18.5in (320mm x 320mm x 470mm)
Gross Weight: 46.2lbs (21kg)
– Don’t store at freezing or high temperatures.
– Keep in a cool and dry place not to exceed 75℉. Keep from freezing. Do not store in open, unlabeled, or mislabeled.
– Keep out of direct sunshine.
– Avoid contact with eyes/skin and keep out of children.
Avoid contact with eyes, skin, and clothing. Avoid inhalation. Do not ingest. Use with adequate ventilation. Keep container tightly closed when not in use. Avoid breathing mists or vapors. When using do not eat, drink or smoke. Minimize contact with air to reduce contamination with mold, fungus, or other organisms which could cause decomposition or spoilage. Wash thoroughly after handling. Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. If spills occur use proper gloves and absorbent pads to clean and dispose according to your local regulation.
First Aid: IN CASE OF CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing. Consult a physician. Wash contaminated clothing before reuse.
IF INHALED: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.
WARNING: May cause damage to organs through prolonged or repeated exposure. Do not breath dust / fume / gas / mist / vapors / spray. Get medical advice / attention if you feel unwell. Dispose of contents/container to an approved waste disposal plant.
Supplemental Information: Stable under normal conditions.
TPU DTF Powder SDS Certificate