Description:
CALCA tacky sublimation paper suitable for Lycra, Polyester and Polyester with Spandex textile. Designed for dye-sublimation printers features a heat-activated adhesive, which helps the paper grip the fabric during sublimation. This reduces undesired effects such as ghosting and leaves you with crisp, high-quality transfers.

Specification:
Roll Width: 44" (1.118m) wide
Roll Length: 328' (100m)
Core Size: 3" (7.6cm)
GSM: 100g
Packing Size: 115cm x 15cm x 15cm (45in x 6in x 6in)
Gross Weight: 13kgs (28.6lbs)
Features:
• Adhesive paper, suitable for various elastic fabrics.
• Above 95% high transfer yield for brighter more vibrant colors.
• Heat activated Adhesive Coating
• Dry speed: about 4 minutes.( If you want to achieve the best state, it is best to leave it for a night after printing, so that the ink can fully penetrate the sublimation paper.)
• Sharp and bright colors
• Printable side is the brighter white side
• 100gsm tacky has a specially designed adhesive coating that is activated by heat, eliminating ghosting
• Small warpage, high fit with the fabric, easy to operate.
• Suitable Printers: All inkjet printers
• The level of tack depends on the fabric in use. Prior testing is required.
• Works for both fabric and hard surfaces
• Suitable for all substrates and blanks

Warm tips:
1. Outside of the roll is the coated / print side. Ideal for industrial and plotter printers using water-based dye sublimation inks.
2. Ideal print room temperature is 20 ~23℃ and 45% relative humidity.
Recommended transfer settings:
1. Temperature: 392℉(200℃), which is the actual temperature on the roller of the transfer machine
2. Time: 35-40 Seconds.(Ideal settings may vary based on the process, print environment & textile.)
3. The shelf life is generally 2 years if kept well. If it is placed on the first floor, the paper should be placed on the tray to prevent moisture, especially when it rains.
4. Store paper in original packaging only. Avoid direct sunlight and extreme temperatures. Place roll in printing room 24 hours prior to printing to acclimate to conditions. Do not leave rolls hanging on printer.

Applications:
Sportswear and functional textiles, personalized interior.

Operating procedures:

Pack and Ship


